Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

how to take out the top bit of your dash???

adamrollo9

Member
Joined
May 21, 2009
Messages
191
Reaction score
0
Points
16
Members Ride
2008 HSV Clubsport
g-day guys i would like to know how to take out the tap dash so i can replace as current one as a crack through it?
 

greenacc

Searching for the billion
Joined
Jul 13, 2008
Messages
6,891
Reaction score
3,061
Points
113
Location
Sydney
Members Ride
VE Berlina
which bit you mean ? the panel around the speedo that goes across to the AC and hazard switches ?
 

adamrollo9

Member
Joined
May 21, 2009
Messages
191
Reaction score
0
Points
16
Members Ride
2008 HSV Clubsport
nah the top part where you put the dash mat along
 

keza87

JCCC NSW Member
Joined
May 15, 2006
Messages
245
Reaction score
2
Points
18
Age
36
Location
Sydney
Members Ride
VX/VY/VZ Wagon LS1
That would be the complete dash!
If you know what you're doing you could do it in about 2-3 hours.
It requires taking the lower half of the dash out like the glove-box and the plastic around the radio.
Then take the demister vents out at the base of the window (2 screws) This will show you all the screws that hold the dash in. Then where the side vents go to the door there is a screw on each side.
You will also have to dis-connect the dash loom.

Re-installation is the reversal.
 
Top