HSV GEN F mode dial wiring

[RevNev]

Hi @RevNev
Where did you get your SSV badge for the HSV console?
I just got the console for my ute and looking for a badge.
Cheers

The SSV badge is a piece of 2.5mm aluminium cut to shape, it's the same size as the SRS dash badge on a VZ. The SSV is a sticker the sign shop made up and it's sprayed with about 6 coats of 2 pack clear. The badge looks pretty good with factory appearance.

 

[ATLRGEMALOO]

@RevNev do you happen to have the wiring pin out for the abs module plug. The plugs I’ve done have a couple of references numbers on the plug so you can figure out the wire numbering, but not on this gem. Flying blind…. Much appreciate

 

[RevNev]

@RevNev do you happen to have the wiring pin out for the abs module plug. The plugs I’ve done have a couple of references numbers on the plug so you can figure out the wire numbering, but not on this gem. Flying blind…. Much appreciate

Here's the pin out of the mode dial, but if you mean the pin numbering sequence on the ABS plug, I'll see if I can find a picture of it.

On the mode dial, pin 1 isn't used.
Pin 2- Back lighting (yellow)
Pin 3- Switch signal to Pin 34 ABS module.
Pin 4- Traction control switch (blue)
Pin 5- Switch signal to Pin 23 ABS module.
Pin 6- Earth (black)

 

[ATLRGEMALOO]

Here's the pin out of the mode dial, but if you mean the pin numbering sequence on the ABS plug, I'll see if I can find a picture of it.

On the mode dial, pin 1 isn't used.
Pin 2- Back lighting (yellow)
Pin 3- Switch signal to Pin 34 ABS module.
Pin 4- Traction control switch (blue)
Pin 5- Switch signal to Pin 23 ABS module.
Pin 6- Earth (black)

@RevNev yeah the number sequence on the abs / ebcm plug itself please mate

 

[BlackVXGTS]

The diagram below may help you:

 

[RevNev]

@RevNev yeah the number sequence on the abs / ebcm plug itself please mate

Here it is

 

[ATLRGEMALOO]

Here it is

View attachment 258679

Thanks mate, I’ll make a start on this tomorrow

 

[ATLRGEMALOO]

@RevNev ive just about got this all complete mate. However the yellow wires going to the centre console plug for the lighting in the mode dial. What pin was it as there are there yellow wires, pins: 8,9 and 36.

Got it, pin 36 is the lighting wire.

 

[RevNev]

@RevNev ive just about got this all complete mate. However the yellow wires going to the centre console plug for the lighting in the mode dial. What pin was it as there are there yellow wires, pins: 8,9 and 36.

Got it, pin 36 is the lighting wire.

I wired the mode dial back lighting, traction control and earth from the original traction control plug. Other than the 2 wires running to the ABS module, the mode dial is an alternate traction control switch.