_R_J_K_
Well-Known Member
- Joined
- Dec 20, 2008
- Messages
- 6,723
- Reaction score
- 1,856
- Points
- 113
- Members Ride
- Zenki S14
Hey there,
So I just went out and got a couple of new idler pulleys and a new belt from Repco, all the pulleys are the same size as the old ones, but the tensioner arm needs to be fully retracted to put the belt one (so the little arrow on the side is not on the markers any more).
I know that the original pulleys were superceded with metal ones, but was the one under the coil pack smaller at all?
Thanks heaps.
So I just went out and got a couple of new idler pulleys and a new belt from Repco, all the pulleys are the same size as the old ones, but the tensioner arm needs to be fully retracted to put the belt one (so the little arrow on the side is not on the markers any more).
I know that the original pulleys were superceded with metal ones, but was the one under the coil pack smaller at all?
Thanks heaps.