Info on manta exhaust system

[BigD]

OK!

I just recently got a 04 Sv6 and wanna put a good exhaust on it, its got pasys atm with a **** system sounds like a tin can, ive been reading up on the forms and seen that the Manta 2.25 into 3 inch is a good one, all i wanna know... Is it??? I dont wanna spend money one something that dont make any difference, and i know the alloys are hard to get a decent sound out of. Would appreciate the help

Cheers :spot on:

 

[Not_An_Abba_Fan]

Every one of these systems you hear about, I have supplied. They are a very good system, no drone, not overly loud and nice and deep.

IMO they are the best sounding on the alloytec, they don't make it sound like a Lancer. They give a noticeable change to your torque curve as well.

 

[BigD]

That's exactly what I'm looking for, so it the system ok with extractors and standard cats or? Is it centre or rear exhaust

 

[Not_An_Abba_Fan]

It's a complete cat back, it will bolt straight up to the original cat pipes. It works perfectly fine if you have extractors. It is twin 2 1/4" off the cat pipes, into two straight through front mufflers, then merges into a single 3" pipe then through a 3" resonator. Picks up on all the original hangers and takes about 1/2 hour to fit if you know your way around a tool box.

 

[BigD]

Well I'm a apprentice mechy, I've fitted a few do sould be fine, but I'm pretty sure the original cat flanges have been taken off, so I may have to get new flanges

 

[Not_An_Abba_Fan]

Have a look just behind the gearbox cross member, if they are still there, there will be two 2 bolt flanges where the exhaust bolts up, the system bolts straight up to those.

 

[BigD]

The fella b4 me had done a really crappy job on the system and cut the two flanges off and welded the pipes straight to the cats.....

 

[Not_An_Abba_Fan]

Bugger....I can supply a couple of flanges as well if you like, or you can cut some off an old system.

 

[BigD]

Yeah will have to get some, so what's the price of the system, and can you deliver or? I'm in qld by the way...

 

[Not_An_Abba_Fan]

$495 shipped. Includes gaskets and clamp.