Injected VK

[Gudgeon Pin]

hey all,
I have a VK Calais (project) with injected 5 litre from a VN in it, and wanted to put a cam in, nothing extreme its just a cruiser, i will be running standard manifold due to lack of funds so i cannot run a big cam anyway. any suggestions?? Or other mods to look at? Internalls are standard. Box is turbo 350 with stage 2 shift kit, diff is locker standard ratio (3:08) dont wanna change that as it works well for the driving conditions and is a good average for the box. have bout 1500 give or take a couple to spend. i see mace have packages for cam, chip and lifters for bout a grand, but not sure what to do? I'm mechanically minded and any help would be appreciated. Thanks

 

[Gudgeon Pin]

**bumpage**

 

[383 hatch]

How many times is this question going to be asked.....Anyway, IMO unless you are going to bump up the comp, leave the stock cam in it or only get a very mild cam, don't go crazy.

Look here: http://forums.justcommodores.com.au...126529-stock-304-guide-choosing-camshaft.html

Heaps of great info in that thread.

What's the main reason for the cam swap? What are you looking for out of the engine?