Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

installation of fog lights?

Macka21

New Member
Joined
Jan 3, 2009
Messages
282
Reaction score
0
Points
0
Location
Whyalla S.A
Members Ride
CAMMED VY SS Series 2 M6
just bought some fog lights for my vy spack series 2 and wanting advice on how to install them?
i have looked under the car and behind where there suppose to go i noticed a cable dangling down do they just connect up to that or is there more involved?

cheers help would be much appreciated
 

sp001in

vyma100
Joined
Jul 2, 2005
Messages
562
Reaction score
7
Points
18
Age
37
Location
QLD
Members Ride
VY ute
same here. I can wire them no worries. What is the best way to install them into an R8 fake bar.

At a loss here. also are the real HSV fog lights round 90mm or oval?
 

chargedvx6

Active Member
Joined
Dec 9, 2006
Messages
1,866
Reaction score
15
Points
38
Members Ride
VY SII HBD Calais L67
just bought some fog lights for my vy spack series 2 and wanting advice on how to install them?
i have looked under the car and behind where there suppose to go i noticed a cable dangling down do they just connect up to that or is there more involved?

cheers help would be much appreciated

Plug em in, buy a relay to go in the engine bay fuse/ relay compartment and get a switch and bezel to cut out na dfit it to the dash surround.

Good way to save $300 on Holdens' pricing
 

midnight.outlaw

New Member
Joined
Jan 22, 2004
Messages
447
Reaction score
0
Points
0
Age
35
Location
South Brisbane
Members Ride
VY S series 2
Not all VY's come with wiring. Some need wiring up like mine did. You need an SS switch, relay, fuse, fuse holder and some wire. The SS switch gives you the GROUND not the active. So it has to wired up accordingly.

-Jase
 

Calaber

Nil Bastardo Carborundum
Joined
Nov 29, 2007
Messages
4,335
Reaction score
1,351
Points
113
Location
Lower Hunter Region NSW
Members Ride
CG Captiva 5 Series 2
just bought some fog lights for my vy spack series 2 and wanting advice on how to install them?
i have looked under the car and behind where there suppose to go i noticed a cable dangling down do they just connect up to that or is there more involved?

cheers help would be much appreciated
The wiring you can see is for the second horn. The fog light wiring, if it is installed, is clipped to the front of each chassis rail behind the bumper. As others have said, you need more than just the wiring.
 

Macka21

New Member
Joined
Jan 3, 2009
Messages
282
Reaction score
0
Points
0
Location
Whyalla S.A
Members Ride
CAMMED VY SS Series 2 M6
i have bought the ss switch and relay so now taking it to an auto electrician
 
Top