Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Installing a bodykit on a factory car..?

VXjeremy

New Member
Joined
Feb 3, 2011
Messages
45
Reaction score
0
Points
0
Location
Sydenham
Members Ride
2001 VX Commodore
hey guys ive got a stock 2001 VX lumina and ive got sitting in my backyard 2 HBD side skirts, 1 rear HBD skirt and a VT SS lower front lip. ive also got 2 metal plates that hold the front lip in place and the rubber moulding that comes with the side skirts.

i'm not asking for a full write up...(unless you want to ;))
but could someone briefly explain what clips and other things ill need to fit these.
also could someone explain where the screws are to take the front bar off.

sorry about all these questions i literally just got my license a week ago and i'm excited to get this fitted and learn. :surprise:
 

Cameron P

New Member
Joined
Jun 29, 2010
Messages
1,652
Reaction score
4
Points
0
Location
Quakers Hill, NSW
Members Ride
REDHOT VX SS
2-3 screws on each wheel arch and approx 4-6 on top between the headlights.. and just wiggle it off the slider brackets. thats your front bar off.. never taken side skirts or rear bar off :p so can someone continue?
 

VXjeremy

New Member
Joined
Feb 3, 2011
Messages
45
Reaction score
0
Points
0
Location
Sydenham
Members Ride
2001 VX Commodore
thanks for that cameron, it'll make putting the lip on ALOT easier
can someone pleeeease continue im dying to get these on
 

Cameron P

New Member
Joined
Jun 29, 2010
Messages
1,652
Reaction score
4
Points
0
Location
Quakers Hill, NSW
Members Ride
REDHOT VX SS
i will have a shot then, the rear bar and side skirts would be held on at the wheel archs by screws.. so take them off and go from there
 

VXjeremy

New Member
Joined
Feb 3, 2011
Messages
45
Reaction score
0
Points
0
Location
Sydenham
Members Ride
2001 VX Commodore
thanks again cam lets hope it works
i still need to know what clips etc i'm going to need to fit it just so i dont have 2 be running around all day buying these things on saturday
 

Jonesy484

OfficialChadyMeetOrganisr
Joined
Sep 28, 2009
Messages
593
Reaction score
3
Points
18
Age
32
Location
Melbourne. Victoria
Members Ride
MY12 VE 2 SSV REDLINE WAGON
go to autobarn and ask
 

VXjeremy

New Member
Joined
Feb 3, 2011
Messages
45
Reaction score
0
Points
0
Location
Sydenham
Members Ride
2001 VX Commodore
well i went to autobarn supercheap and image parts and none of them new
autobarn did say come back tomorrow though to talk to a guy that would know about it so ill try my luck
 

ashbox

back in black
Joined
Apr 17, 2007
Messages
1,302
Reaction score
5
Points
0
Location
The Car
Members Ride
something black
should've tried holdens, atleast they'll give you the correct part numbers and may even be cheaper than supercheap/autobarn
 

timothy2

New Member
Joined
Nov 28, 2012
Messages
11
Reaction score
0
Points
0
Age
32
Location
ayr
Members Ride
vt 1999 calais
Help

i have a vp and a back bumper it is fibreglass just want to know how i would go at putting it on cz it has no screws on it to bolt it in
 
Top