Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Installing amps

HQ_Kid

New Member
Joined
Jan 17, 2005
Messages
32
Reaction score
0
Points
0
Age
46
Members Ride
VS V6
So when I finally get a vr/vs I need to swap my stereo into the new car but where do people run the power cable from the battery through the firewall and to the boot without causing interference with the car electricals? :b:

Cheers
Alex
 
Last edited:

DUMPD_VP_CALAIS

New Member
Joined
Aug 17, 2004
Messages
145
Reaction score
0
Points
0
Age
40
Location
Adelaide
Members Ride
VP Calais
Remove the wiper washer/ coolant reservoir and you might be able to see a hole where some wires go through. Near the master cylinder. Im pretty sure i removed the plastic compartment on the right of the steering wheel and underneath the wheel. its a 15 minute job.

then just wrap the cable around a long piece of wire (clothes hanger) and push/pull it through. try and get a mate to help, makes it alot easier.
 
V

vpcrappadoor

Guest
i just drilled a hole in the firewall and stuck a grommet in the hole and run the wire threw the grommet no leaks and works a treat
 
Top