installing front d bushes

[adamrollo9]

Hi all, I'll be installing new front sway bar links and d bushes for the front. I have a rough idea how to do the links, but no idea how to install the bushes. I have tried to google it but not much comes up, has any one got a how to? Or instructions please.

Thanks

 

[Happyholdenowner77]

http://forums.justcommodores.com.au...96-replacing-swaybar-d-bushes-split-pins.html
Hope this helps

 

[NZ-GTR]

Easiest way to do the D bushes is lift the hood - undo the bolts that hold the D brackets down - then replace the bushes - place D plates back on - reinstall bolts.

The right hand side bottom bolt can be a little tricky but no real problem with a decent socket set.

Main thing is - don't raise the vehicle as that puts load on the sway bar. Its about a 20 minute job both sides - maybe an hour if this is your first time.

 

[adamrollo9]

All good mate, finished it this morning wasn't too hard, was tight too haha

 

[Red Centre Bluey]

Did ya use plenny o' lube?

It will get hot, dry, and she becomes noisy...

 

[adamrollo9]

Pretty sure I got sent the wrong size, what is it 27mm? Or 26mm for a hsv clubby, cheers