Cam-ralph
Active Member
- Joined
- Oct 11, 2012
- Messages
- 178
- Reaction score
- 87
- Points
- 28
- Location
- New Zealand
- Members Ride
- VF SV6
Wanting to know if anyone has installed a factory HUD into their vehicle that didn’t have it come fitted.
I know that it can be fitted into any VF and it requires removing the entire dash, cutting a hole in it, fitting the HUD tapping into the correct 5 wires in the correct wiring loom and then refitting the dash and a speedo cluster hood with the HUD cut out.
What am having trouble with is finding the correct 5 wires to tap into and knowing the exact place to cut the hole.
I also know that the vehicles that come with it factory fitted have the special windscreen with the reflective laminate in it but I am not concerned about this and believe it still works without it or can stick reflective film to the windscreen if need be.
Any help on this would be greatly appreciated.
I know that it can be fitted into any VF and it requires removing the entire dash, cutting a hole in it, fitting the HUD tapping into the correct 5 wires in the correct wiring loom and then refitting the dash and a speedo cluster hood with the HUD cut out.
What am having trouble with is finding the correct 5 wires to tap into and knowing the exact place to cut the hole.
I also know that the vehicles that come with it factory fitted have the special windscreen with the reflective laminate in it but I am not concerned about this and believe it still works without it or can stick reflective film to the windscreen if need be.
Any help on this would be greatly appreciated.
Last edited: