Installing Line Output Converter Help/ Ve Ute 2008

[Tanski]

Hey guys,
I’ve been reading a couple forums about installing a LOC (AP3042A) into the Ute but just can’t wrap my head around it, I’ve tapped into all necessary speakers and that, but the 2 Channel LOC I’m using has a (brown) gnd audio and a (black) gnd, I don’t know what to do with these ones. Any help or diagrams would help heaps.

Cheers guys

(Pictures for reference, excuse the killer Home job)

 

[Xplaya]

Hey guys,
I’ve been reading a couple forums about installing a LOC (AP3042A) into the Ute but just can’t wrap my head around it, I’ve tapped into all necessary speakers and that, but the 2 Channel LOC I’m using has a (brown) gnd audio and a (black) gnd, I don’t know what to do with these ones. Any help or diagrams would help heaps.

Cheers guys

(Pictures for reference, excuse the killer Home job)

http://www.bcae1.com/loc.htm

Seem's the brown-ground is for grounding the shield of the RCA Cable. (My guess is to help stop noise interference you can get through RCA cables next to power cables).

The black would be the ground for the device itself.

You may get away with installing to the same ground but I would install both Brown and Black to good separate ground/earths.