Stevo-d
Calais Lover
- Joined
- Mar 25, 2005
- Messages
- 35
- Reaction score
- 0
- Points
- 0
- Age
- 44
- Location
- Brisbane
- Members Ride
- VK Cusom build (mock Calais)
Hi all,
I'm installing a replacement auto transmission in my VK... am having some real problems aligning the torque converter.
Under suggestion from a workmate, I have the torque converter removed from the flex-plate/flywheel with the intention of installing the torque converter to the transmission first, then bring the transmission up to the block, bolt it on and then secure the torque converter back to the flex plate.
problem is installing the torque converter all the way into the transmission.... I have the old trans' and torque converter - can get it onto that one with some difficulty but i cant find a good method of fitting it on easily.
Will keep trying, but any tips would be greatly appreciated.
Thanks, Steve.
I'm installing a replacement auto transmission in my VK... am having some real problems aligning the torque converter.
Under suggestion from a workmate, I have the torque converter removed from the flex-plate/flywheel with the intention of installing the torque converter to the transmission first, then bring the transmission up to the block, bolt it on and then secure the torque converter back to the flex plate.
problem is installing the torque converter all the way into the transmission.... I have the old trans' and torque converter - can get it onto that one with some difficulty but i cant find a good method of fitting it on easily.
Will keep trying, but any tips would be greatly appreciated.
Thanks, Steve.