Installing your new memcal in your VN - VS Commodore (V6 & V8)

[crawjp]

PS i meant hi flow cat

 

[delcowizzid]

replacing the DELCO ecu is a huge waste of money and point less me or greenfoam can do a tune for about a 10th of the price of a haltech

 

[crawjp]

unreal guys, but im still slightly unsure of how it all works, do I send you my old chip (which I presume is that blue thing lol) or do you send me a new chip thats been tuned? I wouldnt mind keeping mine just incase i want/need to swap it back to stock.

thanks delcowizzid

 

[NORTI]

I paid for another one, so I could keep my stock one, if I ever want/need to go back.

 

[ScoHar]

my security panel was still on, drill bit took out the 2 rivets easy as, even riveted back on after I was done, as I KNOW ILL NEVER REPLACE MY FOAMY CHIP!!!

 

[sgtqld00]

hey can someone fill me in what electronically erasable eeproms that are available do you use for

1 vn\vp 3.8L auto
2 VS 5L Auto

Thanks

 

[delcowizzid]

29C256's 29C512's or 27SF512's they can be hard to get theres a guy selling 27SF's on pgmfi.org right now for cheap or moates.net has them

 

[sgtqld00]

I found some 29c512 and 27sf512 locally. but not 29c256. Can i use a 29c512
in a vn/vp??? If so hows that work?? or is there a link i havn't come across.

Thanks.

 

[delcowizzid]

yeah you can use the bigger 512 in the 808 ecu just fine you just need to burn the tune with an offset or stack the bin 4 times in tunerpro before you burn it.you can switch between the stacked bins too if you really want good for testing tunes back to back.i see you just joint over the way on DH.net

 

[Com91]

I was stuck with this problem until i had a brain wave and used a hack saw to make a straight groove through the middle of the head so that a flat head screw driver could fit in it, works pretty damn well too, my apology's if this has already been suggested.

You will need the correct heads to undo the VS ones.