stocky
New Member
- Joined
- Jun 14, 2005
- Messages
- 5,040
- Reaction score
- 80
- Points
- 0
- Age
- 36
- Location
- Melbourne
- Members Ride
- 1995 HSV Clubsport T5, 1991 VN Berlina
ITEM: SC14 supercharger, 8 PSI pulley, Intercooler pipes (no cooler) to fit a VN-VR
LOCATION: VIC
CONDITION: Used
PRICE:
$1000 8 PSI non intercooled.
$1400 8PSI with cooler pipes.
$1650 8PSI with cooler pipes and 6x 39 lb/hr injectors (12 months used)
DELIVERY/PICK UP INFORMATION: PICKUP ONLY. Wantirna, VIC.
To the guys interstate the PM'd me, I really cant see any easy way of shipping this stuff, unless you were to organise freight, as I really can't be bothered dealing with all that.
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer or Other
CONTACT DETAILS: PM, reply here.
OTHER INFO: Old setup off my VN. ran great. have checked the charger rotors and they are fine, no damage at all. Piping is 3 inch, apart from one small 2.5 inch section. Piping is to suit a 600x300 intercooler, and requires no body modifications. Will fit VN fine, and should also fit a VP or VR. Pipes are sprayed in pacemaker blue. Comes will all silicone joins and clamps(possibly missing 1 or 2).
The charger is missing a small bracket off the back. It runs fine with out it, just shakes a little, but havent had any problems with it this way. If necessary, I'm sure CRS can send you the same bracket cheap.
You normally need a pod filter for this charger, or if wanted, i can throw in my modified airbox to suit it.
Also, please note the old photos. This setup does NOT include the manifolds to move the throttle body before the charger. This is the old setup seen in the engine bay photos
PICTURES:
LOCATION: VIC
CONDITION: Used
PRICE:
$1000 8 PSI non intercooled.
$1400 8PSI with cooler pipes.
$1650 8PSI with cooler pipes and 6x 39 lb/hr injectors (12 months used)
DELIVERY/PICK UP INFORMATION: PICKUP ONLY. Wantirna, VIC.
To the guys interstate the PM'd me, I really cant see any easy way of shipping this stuff, unless you were to organise freight, as I really can't be bothered dealing with all that.
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer or Other
CONTACT DETAILS: PM, reply here.
OTHER INFO: Old setup off my VN. ran great. have checked the charger rotors and they are fine, no damage at all. Piping is 3 inch, apart from one small 2.5 inch section. Piping is to suit a 600x300 intercooler, and requires no body modifications. Will fit VN fine, and should also fit a VP or VR. Pipes are sprayed in pacemaker blue. Comes will all silicone joins and clamps(possibly missing 1 or 2).
The charger is missing a small bracket off the back. It runs fine with out it, just shakes a little, but havent had any problems with it this way. If necessary, I'm sure CRS can send you the same bracket cheap.
You normally need a pod filter for this charger, or if wanted, i can throw in my modified airbox to suit it.
Also, please note the old photos. This setup does NOT include the manifolds to move the throttle body before the charger. This is the old setup seen in the engine bay photos
PICTURES:
