Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

interior roof lining removal

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
title says it all, anytips on taking this down, the rear window is out, ill get to the front window soon, but working with the steel rods holding it up, any tips??

Cheers
 

VL Berlina 5speed

Apprentice Panel Pusher
Joined
Oct 3, 2005
Messages
2,684
Reaction score
30
Points
0
Age
35
Location
Adelaide
Members Ride
Project VL Show car, VS Exec, VY Ute, YZ250F
start at rear,
each rod is held up by 3 little sharp tags which are curled over the rod from the roof
hard to see, sometimes hiden by the fabric which covers the rods

pair of pliars and carfully un-fold the tags, make sure you dont poke the roof and cause a high spot :thumbsup:

then roll the rod towards the front and it should curve downwards

simply bend a little in the middle till one side is out of the end hole and then the other will slide out,

work your way forwards
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
start at rear,
each rod is held up by 3 little sharp tags which are curled over the rod from the roof
hard to see, sometimes hiden by the fabric which covers the rods

pair of pliars and carfully un-fold the tags, make sure you dont poke the roof and cause a high spot :thumbsup:

then roll the rod towards the front and it should curve downwards

simply bend a little in the middle till one side is out of the end hole and then the other will slide out,

work your way forwards

Thanks legend :thumbsup:
 

Bax

Projecting
Joined
Jan 9, 2004
Messages
3,502
Reaction score
37
Points
0
Age
40
Location
QLD
Members Ride
Nothing
If you're not planning on putting it back in, use a stanley knife :D

Yes I'm far too lazy.
 

Goon

Scientific Tuning
Joined
Feb 20, 2006
Messages
2,508
Reaction score
9
Points
38
Location
BrisVegas. QLD
Members Ride
VY CUSTOM.
If you're not planning on putting it back in, use a stanley knife :D

Yes I'm far too lazy.

nah its going back in, its too clean to waste ;)
 
Top