i doubt that they're going to play around with the fitment too much for $1200.
thats basically the price for prime, rub, paint and fit it to the car unless they're using cheap as #### materials instead of half decent ****.
fibreglass kits are rubbish imo, they never fit right or look right unless you spend some time on them.
Thanks for the replies guys. He said it would be $1200 without much "extra" work done. If they needed to stuff around with getting it to fit right it could be like $1500 instead. I haven't bought the kit yet, but it the gto vt fiberglass kit on ebay for $660. If i go ahead with it I will definitely post pictures on here...
if its from the seller street-commodore (by the looks of it thats who it is) don't even bother.i had to fit and paint a vz kit made for a vr for a kid here in town.and i tell you what never again!!! it took me over a month to get the kit on.the rear bumper was absolute **** with the sides curled in something shocking i had to set it up on a jig,split the sides in about 4 places and reinforce with fibreglass.then i had to urethane the bumber to the car and hold it on with heaps of screws til the urethane set.then i had to repair the screw holes with the bumper on the car which wasn't easy trying not to scratch the quarters.the whole front bar had to be reinforced as it was about as thick as paper.the side skirts didn't even fit as they were for a vt!!i had to prime and paint the bars on the car which isn't fun!!! so just a word of advice mate,for them to fit and paint this kit will cost you more than your car itself.they are just absolute rubish kits that aren't worth anything but headaches and an empty wallet!!!