Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Jaycar speedo corrector setup

maldotcom2

New Member
Joined
Dec 11, 2008
Messages
1,035
Reaction score
2
Points
0
Members Ride
Cammed mafless VS Calais 5-speed.
Ok i got the setting worked out, and i'll splice power from the cigarette lighter.

NEW QUESTION: Is there an easier way to access the speedo wire than dismantling the dash? Can i access it from the ECU or something? Not sure at all with this.
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,988
Reaction score
445
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
vs is best to connect to the wire from the trans to the ecu so the ecu sees the right amount of pulses too as with vs it goes to the ecu then the dash unlike vn that goes to dash then ecu.goto www.memcals.com and click on info wiring diagram and find which pin is the sensor input on the ecu plug and join in at the ecu
 
Top