Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

K frame to chassis: Simple Q

Laser

New Member
Joined
May 3, 2019
Messages
19
Reaction score
1
Points
3
Location
Melbourne
Members Ride
VK Berlina
Hi guys,
Just finished painting the engine bay and will be putting in the k frame and my newly built engine in.
I pulled out my K frame nearly 2 years ago and cant remember if a rubber spacer or anything, goes between the K frame and the Chassis/body (where the four bolts go).

Thanks.

VK sedan, 308, VN EFI Heads, Edelbrock RPM Air Gap dual plane manifold and Pacemaker Tri Y's.
Lunati cam 219,229@50 and 0.520 lift
Crow Valve springs to suit over .500" lift and 290lb on the lobe. Part number 4828-16
YT Adjustable roller rockers
 
Last edited:

gd81

Member
Joined
Aug 24, 2004
Messages
164
Reaction score
8
Points
18
Members Ride
VE SII Sv6 Manual
Don't remember any rubber spacers when taking out K frames from my 2 VH's
 

sire01TMK

Active Member
Joined
Nov 22, 2005
Messages
177
Reaction score
41
Points
28
Age
47
Location
DARWIN, NT
Members Ride
84 VK 308
I bought a NOS k-frame and when removing the old one to install the new there definately wasn't any rubber spacers
 

Laser

New Member
Joined
May 3, 2019
Messages
19
Reaction score
1
Points
3
Location
Melbourne
Members Ride
VK Berlina
Too Easy.:)
Painting the K frame as I speak. Now where did I leave the nuts for the bolts?

Thanks Champs.
 
Top