Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

L67 parts

voodoo VT

New Member
Joined
May 4, 2009
Messages
38
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VT Executive
I'm chasing parts for a L67, nothing too major at this stage but repco don't stock them and can't order inm

Dose anyone know where I can get them? I'm on the gold coast. Brisbane is fine too. Or happy to order on the net if I can beat holdens prices.

What I'm after-

Rear main seal+plate
Main gasket under superchager
Vaccum lines off back of charger.

Also the rocker cover gaskets are listed as a different part to ecotec, are they any different to L67 or just the price?

Cheers
 

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
i just returned a rear main and plate..

got it through autopro for 80 bucks..

supercharger gasket will be genuin thats about 50.. go to autopro or motortraders

not sure bout vaccum lines tho
 

voodoo VT

New Member
Joined
May 4, 2009
Messages
38
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VT Executive
cheers mate 80 sounds a hole lot better then 170 from holden.

ill give them a ring and see what they can do.
 

voodoo VT

New Member
Joined
May 4, 2009
Messages
38
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VT Executive
thats the seal and plate ?? gee thats a good price. seal was 32 at holen 172 with plate.

i hav't got the old seal out yet, but i saw on here the plates can leak too. whats the go with that?
 

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
its aluminum.. it can weep oil

its recommended to change the plate with the seal anyway..

worth it to save splitting it again!
 

voodoo VT

New Member
Joined
May 4, 2009
Messages
38
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VT Executive
yeh thats the plan man,

the fella at repco had never heard off it. butg glad i saw it on here.

mate anything else you would recommend to do while the engine and box is out.
 

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
pays to check the front input seal on the trans..

another thing.. when i changed my trans one of the bolting blocks on the converter had snapped clean off.. worth inspecting that! baha

other than that not much really..

while youve got the charger off its worth puttin another thermostat in to save trouble in the future to

if ya need any tips on getting the charger off if ya havnt already let us know
 

voodoo VT

New Member
Joined
May 4, 2009
Messages
38
Reaction score
0
Points
0
Location
Gold Coast
Members Ride
VT Executive
pays to check the front input seal on the trans..

another thing.. when i changed my trans one of the bolting blocks on the converter had snapped clean off.. worth inspecting that! baha

can you just explane these ones to me mate?

yeh i got the chaged off just stipped the fuel lines and got the injecters out 8 or so long neck bolts and see come off, gasket was brittle as tho hench way im chasing a new one now. thought it was coming off in one pease but ended up cracking. the inside of the charged has a little color inside i'd say its the norm, is it worth spending the time to clean it up?

whats your thoughts on ecotec wiring loom or changing over to super6 loom?
 

HARVZ-6

New Member
Joined
Nov 2, 2008
Messages
826
Reaction score
2
Points
0
Age
32
Location
Riverton sa
Members Ride
VT spac super6
just inspect the seal where the converter sits in the trans.. if you havnt removed the vonverter and it hasnt leaked yet just leave it should be all good

and theres 3 points on the coverter where it bolts to the flexplate.. just make sure theres no cracking on the welds..


and not really sure on the looms..
are you converting to an l67?
 
Top