camtech
New Member
- Joined
- Mar 6, 2009
- Messages
- 14
- Reaction score
- 0
- Points
- 0
- Members Ride
- s/charged vt and vy on 20's
I used the mace pulley. soak area with wd40 or similar, grip behind pulley, wind a bolt into the thread and press onto the end of bolt. Use 3 long bolts to wind new pulley on. wind 2 bolts into the new pulley and use these to lock a screw drive into. then simply wind the pulley on with the other bolt and a heap of washers. Order new gasket before fitting, rubbing the surface with wet and dry will help too, dont press too hard.