Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

LED Dash Mod

ICUBYE

Do I Smell Burnin Rubber?
Joined
Mar 9, 2005
Messages
109
Reaction score
0
Points
0
Location
Melbourne, South Eastern Burbs
Members Ride
VS Calais 5.0Litre '96 Series 1
Hello,

I know i have seen the thread on here before, but i cant seem to find it again.

I have some time off and i was gonna do the mod, if someone can link me to the thread it would be great.

what size led's are needed 3mm, 5mm or 10mm?
 

Snotty

New Member
Joined
Aug 6, 2005
Messages
341
Reaction score
0
Points
0
Age
37
Location
the shire!
Members Ride
VR Berlina auto s2
are you talking about the screens or the actual speedo?
 

cunners3

..............
Joined
Aug 19, 2005
Messages
132
Reaction score
2
Points
0
Age
40
Location
VIC
Members Ride
1997 VSII Wagon
Hey,
this is a link http://forums.justcommodores.com.au/showthread.php?t=14783
I did it with T10 wedge leds - They are the same size as your parker globes. You can get the LED ones at any auto store now pretty much. Remember the LED's are polar (i.e. they care about positive and neg) so if you put them in and they don't light up, take them out and turn them around.
If you can find brighter ones than the normal ones at auto stores i'd go for them unless ur gonna remove the green film on the back of the dials.
Have fun, hope this helps
 

ICUBYE

Do I Smell Burnin Rubber?
Joined
Mar 9, 2005
Messages
109
Reaction score
0
Points
0
Location
Melbourne, South Eastern Burbs
Members Ride
VS Calais 5.0Litre '96 Series 1
cool thanks for the link.

Yeah im looking at doing the lot, all the screens, buttons and the dials. Oh and the Security Light :)

I saw on another thread exactly what size and brightness to use, but i cant remember what it said, and i cant find that thread now.

I got fired not long ago so now i got time to play with, so im gonna try and fix my boot leak and then do this LED mod :)
 

Snotty

New Member
Joined
Aug 6, 2005
Messages
341
Reaction score
0
Points
0
Age
37
Location
the shire!
Members Ride
VR Berlina auto s2
Hozy used 11,000 mCD 3mm LED's with 510 ohm resistors.
I couldnt find these so i used 10,000 mCD 5mm LED's. i was happy though.

The bonus is if you solder straight to the board for the LCD screens you can still use the dimmer switch ;)
 
Top