Level 3 Cluster

The one out of the VP will work. You will need to get windscreen wiper switch block from the car the level 3 cluster came out of too. This thread should tell you what you need and how to wire it all up so everything works.

 

What about VN to VP

i got a Stage 3 cluster with the switch block and extra wires from a vn, will this one fit my VP Commodore ?.

 

Are you up for a bit of reading? see this thread->
http://forums.justcommodores.com.au...988-1993/33634-converting-vn-calais-dash.html
I did a how to in it for vp base models with no bcm

 

Thanks

Cheers mate huge help, gonna start converting real soon, looks great.

 

My VN has a VP Calais lvl 3 cluster, and the VN calais trip buttons. Just make sure you double check the wiring from the cluster to the diagrams provided.

 

Check This OUT

Now tell me who thinks this is awesome, i love it but i wanna ask around and also do you reacon brand new for $88 is a good price, check it out on this link VN-VS L3 FASCIA CALAIS/HSV/BERLINA/STATESMAN/MALOO/VR - eBay, Other Car Parts, Accessories, Car Parts, Accessories, Cars, Bikes, Boats. (end time 16-Dec-08 22:06:13 AEDST)

 

Can someone help me ?. i converted to a level 3 cluster but when i first take off the speedo doesn't kick straight in, it will kick in by itself after awhile or if i tap the dash it picks up, can someone tell me what it is ?.

 

sounds like: http://forums.justcommodores.com.au...3/15436-solution-sticky-fuel-temp-guages.html

 

if it was fine before cluster swap then it likely the cluster

 

Do you recon this will help ?

So do you guys recon that when i get the ODO bought back from 273000 to 225000 that my cars done should i get the Dash guys to check and souldier all the solider points ?. Do you recon that would help ?

 

yes that should work would be cheaper to do it yourself but if your no good with a so;dering iron get someone else to fo it