MR VXS2
Member
- Joined
- Sep 3, 2009
- Messages
- 59
- Reaction score
- 25
- Points
- 8
- Location
- Wollongong Region
- Members Ride
- VZS2 Dual Fuel Wagon
Howdys,
About to remove and rebuild a BRC Genius (Fly) convertor and replace the membranes and O rings as it is leaking LPG into the cooling system (Temperature fluctuations) and occasional rough idle... Already serviced the lock off valve and twin filters so thats all that is really left at the moment, besides replacing the temp sensor wiring harness ( I have an intermittent break in continuity from a damaged/kinked wire)
First time rebuild folks, any advice or pointers I should know about before I go ahead and do the repairs?
I have allen key socket hex heads and all the tools required, but just wondering if anyone has any advice that might have done this before already? I couldn't find anything in the DIY section of the forums, yes, I did search first before posting
Looked at a few vids on Youtube also, but nothing specific to my BRC convertor.
Thanks heaps!
About to remove and rebuild a BRC Genius (Fly) convertor and replace the membranes and O rings as it is leaking LPG into the cooling system (Temperature fluctuations) and occasional rough idle... Already serviced the lock off valve and twin filters so thats all that is really left at the moment, besides replacing the temp sensor wiring harness ( I have an intermittent break in continuity from a damaged/kinked wire)
First time rebuild folks, any advice or pointers I should know about before I go ahead and do the repairs?
I have allen key socket hex heads and all the tools required, but just wondering if anyone has any advice that might have done this before already? I couldn't find anything in the DIY section of the forums, yes, I did search first before posting
Looked at a few vids on Youtube also, but nothing specific to my BRC convertor.
Thanks heaps!
Attachments
Last edited: