VYBR8R
VYBR8NV8
- Joined
- Jan 12, 2009
- Messages
- 67
- Reaction score
- 1
- Points
- 0
- Location
- Port Kennedy
- Members Ride
- VY SS ute 5.7/A4
gday guys, ive recently purchased an 85mm BBK throttle body for my ls1.
had a few issues installing it, the orginal bolts into the intake manifold were too short, thats been rectified. but the issue i have now is the throttle cable has some slack in it and the cruise control is too short and wont reach. anybody out there know how to adjust the cables. there doesnt appear to be anywhere you can, ive checked inside the cabin at the pedals, any help would be greatly appreciated. Also is anyone familiar with this throttle body, as my idle speed has increased 500rpm, im not sure if this is due to the increased air flow (bearing in mind i had a ported standard TB) or is the throttle position sensor, i noticed when i brought the sensor over from the original TB that it was angled slightly different, note theres 3 different postions you can fix the sensor in. might try them all see if that effects the idle speed. any advice would be great.
had a few issues installing it, the orginal bolts into the intake manifold were too short, thats been rectified. but the issue i have now is the throttle cable has some slack in it and the cruise control is too short and wont reach. anybody out there know how to adjust the cables. there doesnt appear to be anywhere you can, ive checked inside the cabin at the pedals, any help would be greatly appreciated. Also is anyone familiar with this throttle body, as my idle speed has increased 500rpm, im not sure if this is due to the increased air flow (bearing in mind i had a ported standard TB) or is the throttle position sensor, i noticed when i brought the sensor over from the original TB that it was angled slightly different, note theres 3 different postions you can fix the sensor in. might try them all see if that effects the idle speed. any advice would be great.