Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Lukey 2.5" Catback exhausts $175 :)

stevoss

New Member
Joined
Jul 21, 2005
Messages
222
Reaction score
0
Points
0
Location
newy
Members Ride
s2 vt ss
just thought you guys would like to know if you are looking for a catback exhaust i have just ordered one from my local super cheap auto.

$120 for the cat and center muffler section
PART # AL5-5712

$40 for the tail pipe section (no rear muffler)
PART # T5713

a 'c' clamp and freight and your going to be getting a cheap exhaust system, waiting on delivery which hopefully will be by next week :) Will also be doing an installation write up and with pics :)
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,298
Reaction score
825
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
just thought you guys would like to know if you are looking for a catback exhaust i have just ordered one from my local super cheap auto.

$120 for the cat and center muffler section
PART # AL5-5712


$40 for the tail pipe section (no rear muffler)
PART # T5713

a 'c' clamp and freight and your going to be getting a cheap exhaust system, waiting on delivery which hopefully will be by next week :) Will also be doing an installation write up and with pics :)
The centre section doesn't come with a cat. It bolts on behind the cat.
 

jazza15

Jarryd
Joined
Jun 3, 2008
Messages
511
Reaction score
5
Points
18
Location
Eltham North, VIC
Members Ride
1999 VT II S
So $160 for centre muffler and straight through pipe to the end?
Where do you get this 'c' clamp you speak of?
 

Not_An_Abba_Fan

Exhaust Guru
Joined
Aug 18, 2006
Messages
14,298
Reaction score
825
Points
113
Location
Bunbury, WA
Members Ride
Strange Rover
The 'c' clamp is the clamp that holds the tail pipe to the centre muffler.
 

stevoss

New Member
Joined
Jul 21, 2005
Messages
222
Reaction score
0
Points
0
Location
newy
Members Ride
s2 vt ss
arrived friday and i must say really looks the part, hopefully will be on a hoist otherwise its the garage floor at the mechanics for me tommorrow :( and i already had a look, its all of 4 rubber mounts on the hangers and 2 bolts on the cat flange that need to be touched other than that its all going to bolt on no probs :) for anybody else doing it the workshop manual says to soap up the mounts so they slide on easy.
 

stevoss

New Member
Joined
Jul 21, 2005
Messages
222
Reaction score
0
Points
0
Location
newy
Members Ride
s2 vt ss
yeppers had it on a hoist today for the total of 20mins :) pics are below













Sound was completely unexpected, grumbly on idle and fairly deep on take off but cruise about 2000rpm and its exaclty as quiet as stock, :) awsome and better than i could have asked for :) :D
 
Top