manual convention or a stage 2 shiftkit?

[walesy]

oh nice im in port kennedy! ... well im in sydney at the moment but yeah live in pk ...

 

[centy]

the stally may be a bit high.
You would need to find out the rev range of the cam and the rev limit in your chip.
it would be a waste if the cam started to work at say 2k - 4.5k and the stally is 3.5k.

 

[walesy]

1 x Clive Roller 228 @50 Hydraulic Cam 3200 to 6700 rpm.
1 X 3500 STALL CONVERTER TO SUIT T700.

the stally may be a bit high.
You would need to find out the rev range of the cam and the rev limit in your chip.
it would be a waste if the cam started to work at say 2k - 4.5k and the stally is 3.5k.

sounds alright to me...

 

[scouser king]

sounds right to me to lol

 

[STEALTHY™]

You lose less power through the drivetrain with a manual, since your after power, manual would be the go.

Although a clutch is always fun (and moreso in a car with 200rwkw)

 

[scouser king]

Me and a clutch = no more 18's = no money for me

 

[STEALTHY™]

Me and a clutch = no more 18's = no money for me

You don't 'have' to powerslide just because you can

 

[scouser king]

iam 20 years old powerslides/burnouts, sex, beer are my top 3 like to do.i wish you do them all at the same time lol

 

[STEALTHY™]

iam 20 years old powerslides/burnouts, sex, beer are my top 3 like to do.i wish you do them all at the same time lol

Then whats the problem? You should have money to burn.....so get the manual

 

[scouser king]

yha **** it way not