Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Manual conversion issues

James Lambert

New Member
Joined
Dec 22, 2019
Messages
6
Reaction score
0
Points
1
Age
22
Location
Perth
Members Ride
2007 Holden SSV Ute
Iv just done my manual conversion on my VY 2003 LS1 Ute with very limited issues, the only one I’m having is the fact my car has power but when I turn the key I can’t hear the fuel pump and when I try to crank it I don’t even hear the starter engage. I noticed that when I put my manual wiring harness in it was missing a decent size white plug that sat just above the bcm, and was also missing a black plug that runs from the front left side where the air box sits, down under the bumper (I think it runs to the fuse box) but then also had 3 plugs at the back that I can’t figure out where they go. Please let me know if you have any idea what’s going on
 

_R_J_K_

Well-Known Member
Joined
Dec 20, 2008
Messages
6,723
Reaction score
1,856
Points
113
Members Ride
Zenki S14
Which ECU are you using? And what model did you get the donor loom/parts from?
 
Top