Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Measurements

WogBoyz

435rkw/590rwhp
Joined
Feb 8, 2009
Messages
3,151
Reaction score
16
Points
0
Location
Cairns, Qld
Members Ride
08 VE SSV M6 Ute
Does anyone here know the Diameter of the stock TB the stock intake pipe and stock MAF

Because im changing my intake pipe i need to know there exact diameter to get piping just a lil bigger to fit them

Cheers lads :thumbsup:
 

delcowizzid

on holiday
Joined
Jul 8, 2008
Messages
6,988
Reaction score
445
Points
83
Location
NZ
Members Ride
в∞ѕтεכ √&
3 inch for all
 

Immortality

Can't live without smoky bacon!
Staff member
Joined
Apr 15, 2006
Messages
22,472
Reaction score
19,901
Points
113
Location
Sth Auck, NZ
Members Ride
HSV VS Senator, VX Calais II L67
3" is 76mm. however i'm fairly sure the OD of the TB is 80mm. but will need to double check tommorow
 

Immortality

Can't live without smoky bacon!
Staff member
Joined
Apr 15, 2006
Messages
22,472
Reaction score
19,901
Points
113
Location
Sth Auck, NZ
Members Ride
HSV VS Senator, VX Calais II L67
if your getting alloy pipe it'll only come in 3" i've not seen it in 80mm. you would need to find some silicone joiners that will go from 76-80mm
 

Immortality

Can't live without smoky bacon!
Staff member
Joined
Apr 15, 2006
Messages
22,472
Reaction score
19,901
Points
113
Location
Sth Auck, NZ
Members Ride
HSV VS Senator, VX Calais II L67
if you look at the pick you can see that the silicone joiner that goes onto the MAF is flared. you can also see that the hose clamp around MAF fitting has less exess hanging out the end (then the hose clamp on the pipe end). if he hasn't used a reducer then he's stretched a 76mm straight joiner to suit but i've not managed to do that
 

WogBoyz

435rkw/590rwhp
Joined
Feb 8, 2009
Messages
3,151
Reaction score
16
Points
0
Location
Cairns, Qld
Members Ride
08 VE SSV M6 Ute
oh ok so i will need a 76 - 80mm joiner from the intercooler pipe to the Tb and the same from the pipe to the maf correct?

i guess it doesnt matter if its a few mm to big cus i can just tighten the clamps right down to seal it all up
 
Top