More Low End Power

[daniel555]

Hey!

Just curious, What mods would give me better low end power and mid end power, Im not to fused about going fast, But Taking off and overtaking is more what im looking for.

If anyone could point me in the right direction, Would be great.

 

[johnvtls1]

some 3.9's in the diff will fix that right up.

 

[MACE]

Our cold air intake manifold insulators will help do the trick as shown in the links below. Cost is $130 and $180 for the 12mm and 25mm items respectively. The 12mm item bumps up low end torque by around 10% while the 25mm item brings it up to around 13% and over a broader range.

https://forums.justcommodores.com.au/threads/v6-peformance-parts.96810/

BORED OUT AND POLISHED THROTTLE

Cheers
Steve

 

[daniel555]

Thanks, Looks good. So that'll just go onto a 03 VY series II?

 

[MACE]

Thanks, Looks good. So that'll just go onto a 03 VY series II?

Sure will

 

[daniel555]

Cool, Think ill be getting it in the next couple of weeks, Easy to install?

 

[MACE]

Cool, Think ill be getting it in the next couple of weeks, Easy to install?

I'll let you be the judge

http://www.maceengineering.com.au/ECOTEC_MI_INSTALLATION_.pdf

Cheers
Steve

 

[DUK13Y]

I was looking at the 25mm spacers a while back. Let me know if there is a noticeable performance increase.

 

[mr_kreative]

are they any good lol 25mm?

 

[shaune_m]

Yep as said above grab some Manifold insulators/Plenum Spacers from Mace.
I just did a second hole mod to my airbox and modifyed my stock otr pipe
[http://autospeed.com/cms/A_109586/article.html]
And noticed a slight difference so well worth a go for a minimal cost.
Cheers