more on this bloody gauge install, weres a good hole in the firewall?

[PSYKO PHOENIX]

it says, weres a good hole in the firewall, one thats easy to get to from both sides and will work well for the gauge installation?


also

im thinking of putting the oil pressure gauge here

is there anything behind this bit or can i just drill into it?

 

[Zuicider]

if your car is auto there should be a gromet in the firewall where the clutch cable goes, its a bit to the passenger side on the fire from your brake booster

 

[PSYKO PHOENIX]

yup its an auto, have you used this one?

got any pics? so i know what im lookin for, i have a tendency to **** up when i can see what im looking for

also how hard it it to rin the leads for the sender units to it??

 

[Zuicider]

got no picks but its a rubber gromit with nothing on it. should not be hard just give her sum slack on the leads and cable tie it in sensative areas

 

[PSYKO PHOENIX]

sweet ill have a look!

 

[TrikkBen]

drill your own holes and get a fitted gromet, i had to do that for the airbags on mine and these are a bastard to get through the firewall with anything...

 

[ephect]

heres the clutch hole that u can use

 

[PSYKO PHOENIX]

thanks heaps bro! now i know what im lookin for!

just to make sure iv got it right

 

[Immortality]

na bro, you want to use the grommet that has the red (amp power?) cable going through it in the fore mentioned picture

 

[ephect]

where the thick red cable is goin next to the brake booster thats my audio cable