Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

MSD DIS 4 Plus installation

Discussion in 'V6 Development And Modification' started by GeorgeDee, Jul 25, 2018.

  1. GeorgeDee

    GeorgeDee New Member

    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    1
    Joined:
    Jun 29, 2018
    Location:
    Melbourne
    Members Ride:
    Holden VX Turbo
    Does anyone know or recommend a workshop that has first hand experience with wiring in a MSD Dis4 into a vt-vy ecotec.

    Cheers
     
  2. _R_J_K_

    _R_J_K_ Well-Known Member

    Messages:
    3,860
    Likes Received:
    176
    Trophy Points:
    63
    Joined:
    Dec 20, 2008
    Members Ride:
    Zenki S14
    I can't help, but just out of curiosity are you running it in a drag car or something? Why the need for aftermarket ignition?
     
  3. delcowizzid

    delcowizzid on holiday

    Messages:
    6,656
    Likes Received:
    233
    Trophy Points:
    63
    Joined:
    Jul 8, 2008
    Location:
    NZ
    Members Ride:
    в∞ѕтεכ √&
    Dis 4 is all plug and play apart from feeding it a switched power feed and an earth you fit the separators between the dfi and coils and plug it in
     
  4. immortality

    immortality Moderator Staff Member

    Messages:
    13,045
    Likes Received:
    1,483
    Trophy Points:
    113
    Joined:
    Apr 15, 2006
    Location:
    Sth Auck, NZ
    Members Ride:
    HSV VS Senator, VX s2 Calais S/C
    I fitted it on a VN, as above, it's fairly straight forward once you have the inteface modules that go between the dfi module and the coils. The only external wires need will be positive and negative straight from the battery and any wires for things like the 2 step and ignition retard if using with nitrous etc.
     

Share This Page