My 1989 VN SS 2H023

[VN_SS_CM]

Model:VN SS

Year:1989

Engine:Holden 304

Gearbox:T5 5 speed

Engine Mods:Crane 284, shaved heads, flat top pistons, bored out throttle body,

Poweron't know

Exhaust:extractors, 3 inch cat back exhaust

Diff:3.08 LSD

Interior Full VP Calais Interior

Brakes:VT Twin Piston fronts, Stock rear.

Suspension:Standard FE2

Wheels:Walkinshaw 5 spokes.

Paint:Atlas Grey 2H023

Current Stuff I done: New Headlining, swapped in a full vp interior dark blue grey, carpet, seats, etc, VP level 2 dash cluster, New Dizzy Cap, rotor, leads, fuel regulator, alll fuel rubber lines replaced with gates barricade, new stright thru mandrel bent 2.5 exhaust, new tail lights, front indicators, converted from duel pump to single Walbro GS342

Future mods: Enjoy driving it and looking after it.

cheers cm

 

[jayko42]

Very nice mate, love the look of the VN SS's. Tough looking car, my ute's the same color.

 

[VN_SS_CM]

Little update the little grey pin stripes were coming off so I removed them but left the ss logo for something different and changed covers to VT engine covers and polished up the rocker covers and vt covers! NEVER AGAIN lol new strut tops and shocks all around.

 

[JTR007]

Looks tough! Needs More pics! Plus interior.

 

[Deuce]

That is a nice car!

got more pictures from daylight hours?
Those engine covers are shiney!!

 

[Dan355]

Awesome....

 

[VN_SS_CM]

ok jeepers long time no update....I have given her a home respray excluding Roof and bonnet had to replace all 4 doors due to rust holes behind the moldings also rust behind the bobtails farken....welded in some new metel using old doors and a gold vn executive donated her doors and boot lid to keep this ss alive just. Has full VP Calais interior with hsv dash VX Clubsport R8 rims. will take pics after shes cleaned

 

[VS 5.0]

Good to meet you yesterday mate.

Here's a quick pic.....coz everyone likes pics.

PS.....this thread needs more updates !

 

[VN_SS_CM]

Yes Mr 5.0L it has changed...

* Side moldings installed with new ss stripes
* Factory HSV cold air intake opened up with a heat gun and some wood can actually hear it sucking now......
* New Front bushes installed for control arms, sway bar and z bar
* VB-VL sway bar links installed
* Throttle body bored out getting rid of the nasty step
* Rebuilt and put a new seal kit through the power steering pump easy as $18.50 from Driveline Osborne Park.
* Fuel tank removed and return line replaced back to factory spec also welded up a few holes in her from past owners installing sub box and allowing plaster board screws to go through the floor and tank!
* Tank breather lines redone.
* Replaced Oxygen sensor
* Have redone the tune again got the old laptop and chip reader working after leaving them in the boot over a few hot days!
* Installed a separate relay for LOW and HIGH Beam no more melted fuses also running stronger bulbs.

pictures to come!