My vr 5l manual into my vk.

[VKcambo]

Hey guyz I no there have been lots of threds of this I juat want to get some clean straight answers to how i'm gona do this. I have got a vr 5l manual atm that I drive as my daily driver atm.but the body is up #### creek. I also have a clean vk body with 202 5speed in at home and the wiring has ben messed with. I Po have now made the desition that I will put the 5l and manual in the vk. now do the k frames swap over or not. Is there anyway of getting a half loom so I can wire the dash in. they are the parts atm i'm not sure on and if you can help that would be great. Hopefully the car in the end will be a 355 stroker maybe with a valley blower and running a 9inc rear with lsd 355 or 345 gear with 31splind axels. Think thats the way to go. Cheers

 

[ari666]

I no there have been lots of threds of this

you have NO idea how many threads there are, otherwise you wouldnt have started a new one.

 

[Darren_L]

ari is correct, this thread has been done MANY times, I'm sure you'll find the answers to all your questions if go read through them
for starters read this thread http://forums.justcommodores.com.au/vb-vk-holden-commodore-1978-1985/51233-v6-conversion-vb-vk.html
it covers a V6 conversion, but its the same for a 5L except you use the 5L k-frame