Hey guys Just wondering whether any one of you would have a pulley removal tool to change the press on pulley's in the super six. Just got myself a 10psi pulley :w00t::w00t::w00t: Cheers
I changed mine over the other week, used a mates puller, but generally where you bought it from will lend you a puller for a bond, which is usually around 200 bucks. A puller is a specialised tool, but you don't need some special eaton m90 only puller.. just make sure the pulley comes off square with the supercharger shaft (ie straight off)
Yeah YT said that they don't lend it out anymore as they don't come back hence they charge $200 for it. I was hoping that someone who has one here would be able to help me out. I'll just keep trying if not i'll go to Scotty and Chip Control in Sunbury and get it done.
Don't waste your time, just go to CC. They don't charge the earth and are good blokes. Can't go wrong with someone that has done it heaps of times as well. They can also give you some good advice on set up after the pulley goes on.
