Bogan23
New Member
- Joined
- Jul 30, 2021
- Messages
- 4
- Reaction score
- 1
- Points
- 3
- Age
- 28
- Location
- Wellington nz
- Members Ride
- Vt commy
Hey guys
Sorry not sure if this is correct place to post
Im currently building a skid car old school mitsi lancer with a 3.8 ecotec from a VT
Ive finally got it running and driving (when I dont snap the axles ) it sounds like it idles and revs perfectly fine until I go to drive it. Sitting still idling and revving it sounds mint but u der load when I foot flat it pops slutters and bangs and runs like a sack of its got a brand new 255lph external pump and filter (same as what my mates running and his is fine) ive checked the plugs and leads which are fine im next to check injectors. It was running mint before I pulled it out of the holden so not to sure whats going on any help would be much appreciated
Cheers
Jay
Sorry not sure if this is correct place to post
Im currently building a skid car old school mitsi lancer with a 3.8 ecotec from a VT
Ive finally got it running and driving (when I dont snap the axles ) it sounds like it idles and revs perfectly fine until I go to drive it. Sitting still idling and revving it sounds mint but u der load when I foot flat it pops slutters and bangs and runs like a sack of its got a brand new 255lph external pump and filter (same as what my mates running and his is fine) ive checked the plugs and leads which are fine im next to check injectors. It was running mint before I pulled it out of the holden so not to sure whats going on any help would be much appreciated
Cheers
Jay