Need help on an alarm and central locking for a VB

[85berlina]

Thats right,

refer to two posts above

 

[figjamidhVK8t4]

thanks heaps for that mate...also thers red,yellow, and an orange any idea for them...

 

[85berlina]

Don't you have an installation manual?


Of the two connectors, which one are theses wires connected two?

Are there any stripes on any these?

 

[figjamidhVK8t4]

nope no manual..wires im on about r on the harness with reset switch the smaller connector....and no stripes that i can see

 

[craigvk]

Go to the shop and tell them to give you a manual.

 

[GoogieMan]

Yeah Jaycar's hooch is good.

 

[figjamidhVK8t4]

went to jaycar yesterday nogo on the manual also emailed steelmate themselves..
fixed the self locking but now after i lock it the alarm goes after about 20secs treid ajusting motion sensor no difference...
sorry for being a pain in the behind..

 

[85berlina]

k

Check to see if the negative trigger wire is grounded when the doors are closed. If they are, then there's the problem. Use a multimeter for this.

Check to see the ACC wire is only recieving 12v when the ignition is turned on and when the engine is cranking. If it is receving a constant 12v then it will trigger the alarm.

Unplug the shock sensor and see if there is a diffrence.

Also check to see if the orange wire for the brake switch is recieving a constant 12v. If it is reciveing constant 12v, the alarm will sound. It is only supposed to recieve 12v when the brake pedal is pushed to lock the doors while driving. I find this a pain in the back side so I disconnected it.


Please see attached the wiring diagram for the 838 (If it worked)
You may have to print it, it was a bit small on my computer.



BTW, Hooch, is that a dig at myself or the crap that we sell.

 

[figjamidhVK8t4]

thankyou been trying to find this diagram for so long and jaycar didnt ave em in stock cheers....

 

[85berlina]

My brother has this alarm in his HX and I have the model up from it in my VK so I have the manual lying around.