Need Help With Cruise Control

[millencolin]

hey monarols71

i am in the same boat as u the wirin i mean, i had all the wiring for the elec windows and fitted and worked fine, but for the cruise control what u mean about the relay that connects to the fuse box.......

how did u get ur cruise to latch on (thinkin u have a low bcm)

cheers
alen

 

[monarols71]

The bcm drives the cruise control relay coil, which turns the cruise control on, but the cruise control disengage switch must be closed, and the stop lamp switch must be open for this to happen. (and be travelling at a minimum 40kph).
Man i must get all my stuff together. I've got reams of paper with scans, copies, electronic circuits, modified car circuits, notes, drawings etc all over the place. I'll find that circuit somewhere.

 

[millencolin]

ok but i was under the impression that a low bcm doesnt support cruise control but if u can get the diagram that would be great.

thanks
alen

 

[monarols71]

See post # 15

 

[Mag00ly]

I have the complete fitting instructions for the VS cruise control package. If you want it I can scan and post (17 pages).

 

[Clacker]

I have the complete fitting instructions for the VS cruise control package. If you want it I can scan and post (17 pages).

I'd be interested (and appreciative).

Clacks

 

[Mag00ly]

Pages 1 to 5 of instructions

 

[Mag00ly]

It would seem that all the pages exceed my upload quota. PM your email and I will send them there.

 

[millencolin]

hey mate i c the pic's fine, c my problem is i dont have a wiring harnes and am doing it all from scratch now every thing seems ok to me but one thing for the BCM which wire/wires are/is for the latch circuit......i cant figure it out.
thanks
alen

 

[millencolin]

ps:this is what i have so far

cruise control motor
cable that connects to the throttle
connector with about .5m cable (been cut from the actual harnes)
the switches as in the handle that has the blinker and hi beams on it
oh and the brake switch..........i have postes a wiring diagram back a few posts (not my diagram) but it doesnt make sence any one else got another wiring diagram around.....cheers
al