Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

need help

kelly lynch

New Member
Joined
Mar 13, 2020
Messages
1
Reaction score
0
Points
1
Age
43
Location
campbelltown
Members Ride
ve commondore
I have a ve commodore n I need help on how to remove the drivers side key door lock can anyone help me on how to remove it please ive tried gogle but cant seem to found it on there any help would be highly appericated
 

rambunctious

Well-Known Member
Joined
Jun 9, 2011
Messages
2,371
Reaction score
2,252
Points
113
Location
Alexandra Headland Qld
Members Ride
VZ Executive Wagon
I have never done a ve but I have done a lot of others up to and including vz.

Need to remove the inner door trim to gain access.
Once you can see inside the door the rest should be easy.
They usually have a rod attached which will have to be removed then they are usually held in place by a spring plate type clip.
These clips usually have a lip on them and I use pliers or side cutters to pull the clip off.
 

vywgn

Well-Known Member
Joined
Sep 9, 2006
Messages
785
Reaction score
392
Points
63
Location
Adelaide
Members Ride
1967 Holden HR Premier Wagon / 2015 VFII SV6 Sedan
Ve is simple open the door. Once open on the side of the frame is a grommet, remove this and there is an 7 or 8mm bolt undo this and the barrel assembly will be loose. Start pulling it out from the door then unclip the rod from the back
 
Top