Need some VZ Tail light removal help

[2004_VZ_Acclaim]

Hey all

I've done a bit of searching for this but couldnt find what i was after so here goes...

Made an attempt to remove my VZ tail lights (Acclaim model '04) and everythings going fine until i get to removing the wires/globes attached.i can get the indicator globe out fine but the other 2 seem to be on there quite tight :hmmm: not wanting to risk breaking it or anything,does anyone know how i can remove these safely?

attached is a picture with the parts i'm having trouble with circled in red

from my search i could only find (useful) that the lens tint or whatever is glued on and can be seperated with a heat gun?

any information/help would be appreciated

 

[wortus]

Hey all


They should just twist out by turning them in the same direction as the one that comes out. You could try a little bit of WD40 or silicone spray?

 

[2004_VZ_Acclaim]

thanks, i'll take a look at in a sec. try some WD40

 

[2004_VZ_Acclaim]

ah,some wd40 woulda helped in the first place but they wer just on real tight,few minutes later with some sore hands its all good :spot on:

thanks for the help again,wasnt sure,didnt wanna wreck my lights etc. haha :blah blah: