no oil pressure at oil pump

[skippy73]

Yes it’s a roller cam

 

[shane_3800]

**** so can it be done without taking the motor out??

Yea. but it's a bit of a pain re-sealing the timing cover if the sump is still bolted on.

 

[shane_3800]

Yes it’s a roller cam

Call that seller on ebay just google his buisness name they're in SA. Ask him what gear you need. Your dizzy should have a bronze gear but I'm not 100% if the oil pump needs one.

 

[skippy73]

Ok it ended up being the drive gear that runs off the cam, got her running all good. Reyes to start it later. Won’t crank over, it has a new key head a few weeks old. It locks an in locks doors, red light goes out until u turn the key, then it comes on very faintly. Had this happen before, had the bcm replaced. All fuses an relays are good new Solanoid in starter motor.. any ideas????

 

[skippy73]

the only code comes up is 12 normal operation..