Not just another Atlas grey VN SS

[Dan355]

91 VN SS Power Pack S2

GO

Engine: Holden 5ltr - 355ci - 4 bolt M&W splayed caps.
Induction: TP ProPaw, Port matched.
Heads: Cast VN heads, Ported - 298cfm @ .650
Cam: Custom Camtech Solid FT
Valves: Ferrea 2.05" intake & 1.625" exhaust valves.
Pistons: SRP forged flat top pistons. 0 decked.
Conrods: Scat H beam
Crank: COME
Bearings: ACL.
Oiling: Modified std oil pump with external pick-up, Priority mains oiling, 9L ASR Competition sump, drain backs from rocker covers.
Exhaust: Modified Tri-Y Competition Pacemaker Extractors 13/4" primary, 21/4" secondaries, slip merge joins to tapered 3" collectors.
Pumps: Magnafuel Quickstar 500
Carb: 850cfm QFT E85 Drag, fuel log, Return style Regulator, Holley fuel pressure gauge, 8x6" KnN filter.
Ignition: MSD Pro-Billet Distributor, MSD 6AL-2, Blaster coil, MSD leads
Compression: 12.7:1
Power: 530hp/436ftlbs @ crank with std pacemaker tri-ys.

TRANS

Box: TH350 Reverse patern, trans braked, deep pan, BnM shifter pro ratchet.
Converter: 8" 5600rpm TCE mech diode

Diff: BW VL length, 31 spline moser billet axles, Romac full spool, 3.9 gear set, Ford 9" pinion, TA alloy diff cover, McDonald bro racing udjustable upper trailing arms, boxed lower trailing arms.

UNDERCARRIAGE

Springs: Pedders(f) Lovells(r)
Rubbers: Nolathane(f) Noltec(r)
Shocks: Monroe GT Gas
Brakes: VT Master and Booster, Twin piston PBR calipers, Bendix Ultimate pads, 330mm rotors (f) - Cross drilled and slotted DBA rotors, Standard calipers, Bendix Ultimate pads (r) Braided ADR approved brake lines all round.

INSIDE

Seats: Standard.
Wheel: Isotta
Gauges:
Sounds: Pipes
Mods: Custom vinyl parcel shelf, Custom vinyl centre armrest back board.

HOOPS

Rims: ANZ's 18"x8"
Rubber: Cheapo's, came with wheels

THANKS

Boss Differentials
Hoppers Stoppers
Race Brakes Sydney
Hardy Spicer Drive Shafts
Mondo's Perfomance
Tony Knight Engines

 

[GMHG3N]

nice rig man, always loved the vn vp range. :thumbsup: unreal looking car! :yeah:

 

[wrx884]

car looks hot man i love the rims im thinkin of gettin somthing similar 4 the calais i think it suits this cars colour well hey, either that or the shadow black.

 

[AngryVN]

Very nice indeed, looks hot. What sort of wheels are they? they're the sort of rims im after for my vn

 

[10000_fists]

**** yeah thats tuff as. I've always loveed the Atlas Grey ss and this is a fine example.
Shame about the canary tho.
Good luck with getting it back on the road.

 

[Dan355]

Thanks for the comments guys. Yea trust me i have my fingers crossed for the next inspection. The wheels are from ANZ, i thought they were a good match.

 

[Dan355]

Heres what it sounds like. You can hear the 044 and the exhaust scrape lol

Kilar8 Sound - Putfile.com

 

[nathans1987]

what cam have you got? car looks awesom! and brakes they look bigger

 

[veclubby]

looks bloody nuts ay big fan of the VN SS im really really considering buying one ay just need the cash and itll be sitting in the garage :yeah:

very very nice car mate :thumbsup:

 

[NickVR]

Looks really good mate. Does it state that you have to do an emissions test? Cos I was under the impression that they don't do emissions tests unless there is good reason for it. If they need to test the exhaust then they do a db reading and thats it usually. I don't know but that was my understanding. Keep up the good work.