Not starting after new battery

[PlenumBiscuit]

theres a video somewhere about the main power cable (forgot what its called) that crosses over the motor that can be faulty, someone on here with the technical knowledge might know the one i mean...

Nevermind....

Fusible link - click on this for video

 

[thedart]

theres a video somewhere about the main power cable (forgot what its called) that crosses over the motor that can be faulty, someone on here with the technical knowledge might know the one i mean...

Nevermind....

Fusible link - click on this for video

Great tip!
Just tried it but it didn’t work I was hoping that was it

 

[Fu Manchu]

Full voltage on the battery confirmed.
All connections good.
Starter had a little love tap. It still could be the starter has **** itself.

Next is to get a decent scan tool on to see which modules are talking and which are not. Those are not easily obtained.

 

[thedart]

Full voltage on the battery confirmed.
All connections good.
Starter had a little love tap. It still could be the starter has **** itself.

Next is to get a decent scan tool on to see which modules are talking and which are not. Those are not easily obtained.

Yes battery full voltage.
Gave a love tap now and still nothing.
Even put screwdriver across the terminals on starter solenoid and got spark but no start. Terminals a little corroded but now suspect it is the starter motor.

I can hear a click when starting then about 30sec later the same noise which I think is solenoid pushing the arm forward but not turning the engine l.

I was worried I might have fried computer but if the starter is getting power and trying to do something then most likely a starter issue.
It may have fried when I tried to jump start it maybe.

 

[Fu Manchu]

Lucky. Starter is an easy job.