odd exhaust problem

[anarklov3r]

$600 for a cat back exhaust? Thats fairly excessive...
2 1/2 inch cat back should cost ~ $250

 

[rob drag racer]

$600 for a cat back exhaust? Thats fairly excessive...
2 1/2 inch cat back should cost ~ $250

where in the country everything is a rip off having said that i got a redback 2 1/2 this morning 2 days of use cat back for 150

 

[anarklov3r]

Thats more like it... lol

 

[delcowizzid]

thats better than 600 and should let it breath nicely hopefully this one lasts

 

[rob drag racer]

i had a look at my resonator and tail pipe section it seems to be bent a little other then where it should be maybe that's why it keeps destroying mufflers well im off to go get my new zorst should be a headache getting there seeing it sounds like a truck lol

 

[pow3rslave]

if youre live axle and lowered, could the panhard need adjusting? could be the sideways shift is knocking it. i had a rattle that was something knocking it, and i think the panhard was to blame

 

[Not_An_Abba_Fan]

With the series 2 VN the stock exhaust came with a flex in the rear muffler to alleviate vibrations and to stop the exhaust from cracking.

Get a flexible bellows fitted between the two mufflers and it should fix your problem.

 

[rob drag racer]

well its on but for some reason i get a clanging when under heavy breaks its hitting the diff center i think its not the panhard i checked that i cant work it out all the rubbers are on ect but ill have another look tomorrow

 

[Not_An_Abba_Fan]

If it is hitting the diff, loosen the clamp on the rear muffler, push the middle miffler away form the diff and tighten the clamp.

 

[rob drag racer]

If it is hitting the diff, loosen the clamp on the rear muffler, push the middle miffler away form the diff and tighten the clamp.

i cant its a welded center piece with a clamp to join the tail pipe on i think i may have to adjust the tail pipe so the rubbers hold it higher or maybe if worse comes to worse cut a piece out of the center about an 3 or 4 cm long and clamp it back together it almost seems just that little bit to long like you said