Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

oil light

Discussion in 'VR - VS Holden Commodore (1993 - 1997)' started by benno9911, Apr 1, 2010.

  1. benno9911

    benno9911 Donating Member

    Messages:
    231
    Likes Received:
    0
    Trophy Points:
    16
    Joined:
    Jan 28, 2010
    Location:
    Warrnambool
    Members Ride:
    03 VY S2 Exec
    well another little annoying think as arrived why my car while Idling in gear and hand break off the oil light flashes to the shaking of the engine but while in park and hand break on the oil light doesn't do anything. cause i just dumped it and put brand new oil and oil filter the outer day
     
  2. Brett_jjj

    Brett_jjj Well-Known Member

    Messages:
    6,805
    Likes Received:
    74
    Trophy Points:
    48
    Joined:
    Oct 16, 2009
    Location:
    Tamworth NSW
    Members Ride:
    vs commodore
    It might be a bad connection at the oil pressure sensor or the sensor itself is stuffed.Is the oil at the right level after the oil change? Also was it the right type of oil filter fitted? With the engine running, carefully wiggle the wiring and connector near the sensor and see if the light flickers then.If not its probably the sensor itself.
     
  3. benno9911

    benno9911 Donating Member

    Messages:
    231
    Likes Received:
    0
    Trophy Points:
    16
    Joined:
    Jan 28, 2010
    Location:
    Warrnambool
    Members Ride:
    03 VY S2 Exec
    the levels are all good and its the right filter i will have a look at the sensor in day light 2morro
     
  4. Brett_jjj

    Brett_jjj Well-Known Member

    Messages:
    6,805
    Likes Received:
    74
    Trophy Points:
    48
    Joined:
    Oct 16, 2009
    Location:
    Tamworth NSW
    Members Ride:
    vs commodore
    Let us know how you go.Cheers.
     
  5. benno9911

    benno9911 Donating Member

    Messages:
    231
    Likes Received:
    0
    Trophy Points:
    16
    Joined:
    Jan 28, 2010
    Location:
    Warrnambool
    Members Ride:
    03 VY S2 Exec
  6. moff_man

    moff_man operation HQ under way.

    Messages:
    964
    Likes Received:
    4
    Trophy Points:
    18
    Joined:
    Nov 22, 2008
    Location:
    2710
    Members Ride:
    95 VR II berlina wagon v6, 72 HQ ute 253
    to be shure it not the oil pump i would get a oil pressure check done asap. if it was a dodgy sensor it would be on all the time aslo if it was a wiring issue it would be on all the time

    side note have you just washed the engine?
     
  7. benno9911

    benno9911 Donating Member

    Messages:
    231
    Likes Received:
    0
    Trophy Points:
    16
    Joined:
    Jan 28, 2010
    Location:
    Warrnambool
    Members Ride:
    03 VY S2 Exec
    nope i havent done anything to it beside fixed a leaking inlet gasket but it was done by natrad and they dumped the oil and did the filter
     
  8. Brett_jjj

    Brett_jjj Well-Known Member

    Messages:
    6,805
    Likes Received:
    74
    Trophy Points:
    48
    Joined:
    Oct 16, 2009
    Location:
    Tamworth NSW
    Members Ride:
    vs commodore
    If the oil pressure has a problem,you will be able to hear the engine rattling,it will be quite loud and noticeable.If the engine noise has changed recently then you know it will be an oil pressure problem.If the engine still sounds ok,then Id replace the oil pressure switch (sensor) and then see what happens.They are around $25 from holden.I replaced mine about 2 weeks ago,mine was still working ok, but it was leaking oil past the wiring connector pins on the sensor and making a mess.If theres no change with the oil pressure light after changing the sensor,then get the oil pressure tested like moff man suggested.I wouldnt go driving it like that as least until you know the oil pressure is ok from the pressure test.
     
  9. benno9911

    benno9911 Donating Member

    Messages:
    231
    Likes Received:
    0
    Trophy Points:
    16
    Joined:
    Jan 28, 2010
    Location:
    Warrnambool
    Members Ride:
    03 VY S2 Exec
    it hasn't got a rattle of any kind but it makes the old engine whine but that's normal i will get a new sensor and see if that helps
     

Share This Page