lol do you still think you might be able to claim on it? This is a copy of the post by vh-holden: Vehicle Recall Search Results for HOLDEN VR Executive, VR Berlina, Acclaim Problem: FAULTY THIRD SEAT HOLD DOWN BRACKETS Make: HOLDEN Model: VR Executive, VR Berlina, Acclaim Variant: Executive (Series II), Berlina/Acclaim (Wagon) Date Range: VIN Ranges: Status: Inactive Defect: When the third seat is fitted to vehicles the operator may have difficulty locking the seat fully down into position. Consequences: This could cause injury to passengers in case of an accident. Corrective action: Replace the third seat hold down brackets. Parts disposal to be advised. Notif. Date: 10/07/1995 DOTARS No.: R95/042 Supplier Name: HOLDEN Campaign No.: 95-H-05 Vehicle Recall Search Results for HOLDEN VR, VS (Up to October 1996) Problem: TRANSMISSION FLUID OVERHEATING AND IGNITING Make: HOLDEN Model: VR, VS Variant: Automatic, Towbar Date Range: Up to October 1996 VIN Ranges: L645621-L979936 for V6 engined vehicles. L645621-L986809 for V8 engined vehicles. Status: Inactive Defect: Overheating of the automatic transmission fluid can occur during towing. Consequences: Overheated fluid can discharge from the breather tube or dipstick tube and may ignite if it contacts hot engine components. Corrective action: Replace dipstick with one that has a lock-seal top and reroute the transmission breather hose. Notif. Date: 22/11/1996 DOTARS No.: R96/083 Supplier Name: HOLDEN Campaign No.: 96-H-03 Problem: Headlamp patch harness connector corrosion Make: HOLDEN Model: VR, VS Variant: Date Range: 1993-1997 VIN Ranges: Statesman VR, VS and VR Series II: 6H8VRY19URL674058-6H8VSY19HVL213857; Caprice VR and VS: 6H8VRZ19URL676992-6H8VSZ19HTL939663. Status: Inactive Defect: Right hand side headlamp patch harness connector; due to insufficient clearance to the battery, contamination caused by battery vapour emissions and/or water corrodes connector. Consequences: Short circuit and fire. Corrective action: Examine headlamp patch harness connector for heat damage or corrosion on either the connector body or terminals. If wiring insulation heat damaged replace patch harness assembly. If any connector or terminal damaged replace all terminals and both connector halves. Relocate patch harness connector away from the battery. Notif. Date: 15/10/1998 DOTARS No.: R98/063 Supplier Name: HOLDEN Campaign No.: 98-H-03
