Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

>>>Performance v6 enigne<<<

cracker

Member
Joined
Aug 21, 2004
Messages
961
Reaction score
8
Points
18
Age
35
>>>Performance v6 enigne<<<for sale victoria

Vp v6 series two motor, bored and honed 40thou, ACL race series pistons and chrome molly rings, standard con rods, crack tested, check for bend and twist, fitted with ARP bolts, resized, pistons and con rod blanced, skimmed heads, 3 angle valve seats, k-line guides, new stem seals, slight port work, stock manifold with smothed elbow, wade 992a cam, new lifters, single row master timing chain, ACL big end and main bearings, new seals through out, new brass welch plugs. very good fast v6 engine can here running/going. machine work done by duggan blancing and heads done by hansford motors and doctor bob chip. Have recpits for most things and pictures of it all when i built it. located in greensbrough.melbourne
$2500.
 
Last edited:

g00gz

New Member
Joined
Feb 8, 2006
Messages
244
Reaction score
0
Points
0
Age
43
Location
Adelaide
Members Ride
'08 Accord Euro
Is it new? if not how many km's since rebuilt? Got actual / estimated power ratings?
 

cracker

Member
Joined
Aug 21, 2004
Messages
961
Reaction score
8
Points
18
Age
35
5000km just run in around, 130-150rwkw.
pulls so much harder then a stock engine i drove a headers exhuast and cai vn series one the other day and it has nothing on this at all.
the kick down from 40-50km is pretty brutal. like anyone whos around will look and glare at you something shocking.
never had it on dyno or dragged it. but on private property i race my mates ba staight 6 and it shat on that. it sounds hell of alot meaner then a standard engine too when it comes on cam.
 
Top