Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

please help

J

JEZ088

Guest
ok here is the deal i am in the middel of replacing my crank angle sensor and have removed the bolt and balancer but am stuck with how to remove th plastic shield that is held in by 3 studs to shield the sensor.. i need to remove it asap as i gota drive tomorrow but am not sure what to do.. i have a vr commodore and i have removed the harmonic balancer once before but never the crank angle sensor so im new to this damn plastic shield:bang: here is a pic of what i am talking about.. u can see the plastic is held in by 3 studs.. i need to know how to get that plastic out.. cheers for any help
 

Attachments

  • IMG_7009.JPG
    IMG_7009.JPG
    28.5 KB · Views: 234

bluecar

Member
Joined
Jun 22, 2005
Messages
118
Reaction score
0
Points
16
Age
70
Location
rural victoria
Members Ride
VS EXECUTIVE WAGON
Think you just undo the bolts and it comes off. Is there some complication with this?
 
J

JEZ088

Guest
just a slight one.. they arent bolts.... minor complication but i fixed it so dont worry
 
Top