Jesterarts
Your freedom ends where mine begins
- Joined
- Nov 22, 2005
- Messages
- 3,817
- Reaction score
- 105
- Points
- 48
- Age
- 38
- Location
- Victoria
- Members Ride
- 2010 Nissan X-Trail ST-L
Hey guys,
Just want to pitch an idea i had after reading the threads about POD's And CAI's.
I want to mount a K&N pod filter in my existing airbox...
I pretty much want to replace the current panel filter with a piece of thick plastic. I then wanna cut a hole in the plastic and mount the pod filter on the plastic using a adapter kit...
I got a diagram attached if i haven't explained anything properly..
Any ideas, critisism etc...
Just want to pitch an idea i had after reading the threads about POD's And CAI's.
I want to mount a K&N pod filter in my existing airbox...
I pretty much want to replace the current panel filter with a piece of thick plastic. I then wanna cut a hole in the plastic and mount the pod filter on the plastic using a adapter kit...
I got a diagram attached if i haven't explained anything properly..
Any ideas, critisism etc...
Last edited: