ashzv6
New Member
- Joined
- Mar 27, 2006
- Messages
- 260
- Reaction score
- 2
- Points
- 0
- Location
- melbourne
- Members Ride
- VN v6 s2 Berlina 5spd
vn series 2 v6 problem
so i put my manual back into first at 20 and flattened it going to over take,
and it didnt wanto go past 40km, normally it shoots upto 65/rev limit.
it was like it didnt wanto rev past 3,000. it wasnt bouncing it was smooth but just not reving up.
i knew this was bad so i cruzed. hit a higher speed limit and went to flatten it in 2nd, same thing, it was booting then in 2nd at 75km it just stoped reving.
like i was past the power range or something.
it had about 10 kw.
something was stopping it from reving past 3/4000.
any suggestions.
i didnt think it was so much the dif/clutch/gearbox.
more like the ecu going nutz.
please help
it doesnt always happen just sometimes.
and i only noticed it yesterday.
so i put my manual back into first at 20 and flattened it going to over take,
and it didnt wanto go past 40km, normally it shoots upto 65/rev limit.
it was like it didnt wanto rev past 3,000. it wasnt bouncing it was smooth but just not reving up.
i knew this was bad so i cruzed. hit a higher speed limit and went to flatten it in 2nd, same thing, it was booting then in 2nd at 75km it just stoped reving.
like i was past the power range or something.
it had about 10 kw.
something was stopping it from reving past 3/4000.
any suggestions.
i didnt think it was so much the dif/clutch/gearbox.
more like the ecu going nutz.
please help
it doesnt always happen just sometimes.
and i only noticed it yesterday.