Power steering o-ring question

[Irukanji]

Anyway, wondering what size o-ring is required for the feed lines which connect into the power steering rack itself? About to swap the steering rack for a recond one, and getting parts together so I can get it done in a week or two when the weather is nice.

I assume it is the same as the small o-ring from the high pressure side of the power steering pump, however GM likes to #### around so it is probably different/smaller.

Thanks

 

[accentstencil]

Just go to Holden and tell them which ones you want and you'll get the right size.

 

[gungazza]

normally when you get a reco rack orings come with it

 

[Paulski]

Hey, im also wondering what o-ring size or is it a special seal (my one from the low pressure line is flat, maybe its squashed out of shape?) Also I dont appear to have a o-ring/seal on the high pressure line(one that go's to the pump)??? Thanks in advance guys

 

[Nut Kracker]

Just go to Holden and tell them which ones you want and you'll get the right size.

Refer post #2